普光气田含硫污水尾气处理工艺应用与优化

针对中国石化普光气田产出水属于典型的含硫污水,密闭处理系统中产生大量高含硫尾气,论述了尾气处理工艺中存在的问题,优化了单一的生物除硫、活性炭吸附工艺,增加了一级碱洗、氧化除硫工艺,实现尾气达标排放。     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

汉江上游金水河流域氮湿沉降

汉江上游金水河流域是南水北调工程的重要水源涵养区,但是氮污染已成为该流域水质的主要威胁因素.该研究对汉江的金水河流域开展了为期1 a(2012-02~2013-02)的氮湿沉降观测,并利用氮输出模型估算了氮湿沉降对河流氮负荷的贡献量.结果表明雨水中总氮(DTN)的浓度在0.24~2.89 mg·L-1之间,铵态氮(NH+4-N)、硝态氮(NO-3N)及有机氮(DON)分别占42.8%、13.3%和43.9%;雨水氮浓度随降雨量增大而变小,明显受到降雨的稀释作用.流域内氮湿沉降主要来自人类活动,沉降负荷在4.97~7.00 kg·(hm2·a)-1之间,受降雨量的主要影响,上游地区的氮湿沉降负荷>下游地区>中游地区,春夏两季约占全年氮湿沉降的81%.流域氮湿沉降对河流氮负荷贡献量约为34 000~46 000 kg,只占流域氮肥贡献量的5.05%~6.78%,远小于流域内农业活动化肥氮的贡献量,不是河流氮的主要来源.     

粉煤灰负载Fe2O3脱除气态单质汞的试验研究

在固定床反应器中研究了利用燃煤电厂固废粉煤灰(FA)负载Fe2O3所制备的Fe2O3/FA催化剂对气态Hg0的脱除情况,发现Fe2O3/FA具有较高的脱除Hg0的能力.同时,考察了Fe2O3负载量、温度、空速、Hg0浓度、烟气成分等对Fe2O3/FA脱除Hg0的影响.结果表明,Fe2O3/FA对Hg0的脱除能力随Fe2O3负载量(1%~10%)的增加和温度(120~200℃)的升高而增强;Fe2O3/FA在较低的空速和Hg0浓度条件下表现出了更高的脱除Hg0的活性;HCl和O2促进了Fe2O3/FA对Hg0的脱除,而SO2和H2O抑制了Fe2O3/FA对Hg0的脱除.逐级化学提取实验结果证实,Fe2O3将Hg0氧化为Hg2+的化合物并吸附在FA上,这是Fe2O3/FA具有较高的脱除Hg0能力的原因.     

Bi-PbO2电极电化学氧化去除模拟废水中氨氮的研究

本实验采用钛网作为基体,利用电沉积方法制备了纯PbO2电极和Bi-PbO2电极,通过SEM、XRD、XPS对电极的表面形态进行了表征,利用循环伏安法对Bi-PbO2电极电化学特性进行了研究.同时,以氨氮模拟废水作为研究对象,考察了Bi-PbO2电极的电催化活性,探讨了氨氮电化学氧化降解机理.结果表明,Bi-PbO2电极的形态表征、电催化活性明显高于纯PbO2电极,氨氮的去除效率随电流密度的增加而提高,碱性条件下氨氮的去除效果明显好于酸性条件,适量浓度的Cl-的引入在碱性条件下提高了氨氮的去除效果.当氨氮初始浓度为50 mg·L-1、电流密度为40 mA·cm-2、pH=12、Cl-浓度为600 mg·L-1时,电解120 min后,氨氮100%去除.氨氮的降解机理为:体系中无添加氯离子,酸性条件下氨氮主要是通过间接氧化去除,碱性条件下通过直接电氧化和间接氧化共同完成;体系中添加氯离子,氨氮的去除主要是通过溶液中生成的有效氯间接氧化去除.     

铜铈复合氧化物上石化行业典型VOCs的氧化行为与动力学

采用共沉淀法和等体积浸渍法制备了CuCeO x复合催化剂,对材料的物化性质进行了XRD、低温N2吸脱附、H2-TPR和O2-TPD表征.以石化行业典型VOCs(苯、甲苯和正己烷)为探针污染物,研究了污染物组成与浓度、反应空速、O2浓度、H2O浓度和催化剂种类对其氧化行为的影响,并对反应动力学参数进行了模型拟合.共沉淀得到的催化剂具有均匀的活性相、好的低温可还原性能和较多的活性表面氧物种.甲苯氧化率随着污染物浓度升高而降低,高转化率下苯浓度与其氧化率无相关性,正己烷的氧化率与入口浓度呈正比.苯能够显著抑制甲苯的氧化,而甲苯加入有利于苯的氧化.正己烷对苯氧化的影响较小,但能够促进甲苯的转化,苯系物对正己烷氧化有明显的抑制作用.低空速和高氧浓度都有利于污染物的氧化,氧浓度的变化对正己烷和苯的氧化影响较小.水汽对甲苯的氧化有明显的抑制作用,而对苯和正己烷氧化有明显的促进作用.共沉淀催化剂具有更好的甲苯和苯氧化性能,而无水条件下浸渍催化剂具有更好的正己烷氧化性能.拟一级动力学模型能够很好地模拟不同条件下污染物的氧化行为.     

利用热活化过硫酸盐技术去除阿特拉津

利用热活化过硫酸盐(S2O2-8)技术去除水中的阿特拉津(ATZ).结果表明,增加溶液中S2O2-8浓度或提高溶液反应温度,可加速ATZ的降解.ATZ的降解是一个二级反应,其速率和溶液中ATZ和S2O2-8的浓度都成正比.初始pH为3.0~10.0时,S2O2-8对ATZ都有很好的降解效果,在酸性和中性时,降解效率高于碱性条件.利用自由基探针发现,在酸性和中性条件下,起降解作用的主要是SO·-4,而碱性条件下OH·占主导.ATZ的降解受到Cl-、CO2-3和腐殖质(HA)的影响.其中,Cl-对反应的影响比较复杂,低浓度时Cl-会生成具有高氧化还原电位的Cl·促进ATZ的降解,而高浓度时Cl·会继续反应生成氧化能力相对较弱的Cl2·-,从而抑制反应的进行.HA和CO2-3都对反应有明显的抑制作用.     

组合工艺在养猪废水处理中的工程应用研究

针对某猪场养殖废水排放所造成的严重污染问题,采用“固液分离+ UBF厌氧反应器+接触氧化+曝气生物滤池”的组合工艺,对废水中的COD、BOD、氨氮、SS去除效果明显,去除率分别为93.7％、94.4％、95％、77.1％,处理后的水质达到《国家畜禽养殖业污染物排放标准》.该工程运行费用仅为1.509元/m3,处理成本低.同时UBF池中产生的沼气可以收集并利用,猪粪和污泥可制作有机肥,实现了废物资源化利用.